200 Watt

You want to know the top 5 200 watt vape mods for 2016 so far? You’ve got lots of choices now including temperature control (TC) devices and loads of lovely colors. Every major manufacturer is in on the act too and there are several excellent tanks that can handle the heat and power of a 200W device. Here’s a quick look at some of the top devices major mod designers have to offer.

1. Snow Wolf 200W Box Mod

Snow Wolf 200w Champagne

This beautiful variable watt box mod is also a Temperature Control vaporizer as they all are in this list; a 2-for-1 as they say. Set output between 5W and 200W or let the mod do that for you according to the temperature setting you choose. The temp range goes from a low of 212F right to 662F which is the highest possible value among reputable, regulated products. When you buy an atomizer to fix to the Snow Wolf 200F, choose one that can handle 0.05 ohms or higher using temperature control Nickel 200 coils or Titanium. You can also select Kanthal wire for Variable Watt vaping. The body is made from durable, rust-resistant stainless steel with a black glass back and front. The Snow Wolf uses removable 18650 batteries contained behind a magnetically-sealed door, but the best bit is a skillful wolf etching.

2. Tesla 200W TC Box Mod

Tesla 200w black

This exceptional device is to vaping what an electric Tesla vehicle is to driving. Using two high-drain batteries, the Tesla allows vapers to control their temperature or watts: 1W to 200W or 200F to 600F. The Tesla Pulse Output feature works after 150W. Install atomizer builds of 0.08 ohms or higher. The tough aluminum body is finished with carbon fiber for a refined finish.

3. Wismec Reuleaux RX200

Wismec Reuleaux RX200s

This is a combination effort: Jay Bo designed this sporty, light-hearted Wismec device. You have to buy three 18650 cells unlike the other two, so that is the only real down-side: paying another $10 for cells. Otherwise, there is a lot to love on this attractive and slender device. The built-in control chip has been newly designed for the Reuleaux RX200 to supply reverse polarity defense, to support Titanium and Nickel 200 coils, and to allow 0.05-ohm coil builds made of these top-quality materials. Wismec must anticipate upgrades because they give vapers the option to update firmware later using the USB port supplied. Every detail of power and output is displayed on the 0.69″ screen. Controls and the display are set back to protect them.

4. IPV3 Li 200W Box Mod


At Pioneer4You, designers have been steadily upgrading their IPV line; and this is the culmination of all their efforts: the IPV3 Li. It is not just another 200-watt mod but one made by leaders in this competitive industry where many companies have something to offer. How do you know which one to choose? Select a reputable brand and a device that’s enjoyed some chatter online. Read and listen to what other consumers have been saying. The IPV3 features a Yihi SX330-V3SL chipset which protects the device and user from voltage and resistance extremes plus conditions that are just downright dangerous. Even follow your vaping history. With TC mode enabled, the iPV3 Li is capable of supporting 0.1-ohm atomizer coils.

5. Kanger KBox 200W

Kanger KBOX 200W White

When the box mod format got going, Kanger didn’t waste time: they came out with the KBox, a low-powered device for those new to VW mods. Now you can buy the VW/TC 200W Kanger KBox in one of several colors. Its frame is vented with little holes in the shape of a “K” for a unique appearance. Select black, white, or red and a matching Kanger tank using Nickel 200, stainless steel, Nichrome, or Titanium coils. The Subtank Plus or TopTank is a good idea. Work with between 7W and 200W. Dual 18650 batteries are not included: you have to supply them, but that also means you can replace and recharge without being connected to a USB cable.